Ektor 2687 Ektor Razor Recessed Emergency Edgelite Exit 24M Pro Black
Ektor 2687 Ektor Razor Recessed Emergency Edgelite Exit 24M Pro Black
- 70 % Off$128.70
Description
Features
- Single and double-sided decals
- Soft-start charger to reduce building load
- Available in low illumination area black model
- Fast emergency switch-over (<0.5s) for high-task areas
- Chain and rod mounting with Surface and Rod Mount Kit
- Long life electronics
- High Quality Lithium battery (LiFePO4) and smart charger
- Self test (AS2293/IEC62034)
- Fully compliant (AS/NZS 2293)
MECHANICAL
| Body Material | Polycarbonate |
|---|---|
| Diffuser Material | PMMA |
| Fitting Colour | Black |
| Installation Type | Recessed |
| IP Rating | IP20 |
ELECTRICAL
| Electrical Rating | Class II |
|---|---|
| Input Frequency | 50 Hz |
| Input voltage | 230Vac |
| In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac – 253Vac or 240V +6% | |
| Maximum Wattage | 3.7 W |
| Standby Power | 1.7 W |
| Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge. | |
| Working Temp Range | 0 to 40 °C |
LAMP
| CCT Configuration | Single |
|---|---|
| CRI | >80 |
| Lamp/LED Current | 75 mA |
| Lamp/LED voltage | 9 V |
LED LIFETIME
| LED Lifetime Rating | >40Y/06M |
|---|---|
| AS2293.3-2018 Projection of Light source life for LED Exit signs (appendix E) Defines the projected time until the surface luminance falls below the minimum required surface luminance for an exit sign. | |
COLOUR TEMPERATURE
| CCT | 6000K |
|---|---|
| LED Wattage | 0.75 W |
DRIVER
| Dimmable | No |
|---|---|
| Driver Included | Yes |
| Integrated Driver | No |
| Driver Type | DALI DT1 Emergency |
| Flex & Plug or Lead Length | 1200 mm |
| Wiring Type | Re-wireable Flex & Plug (2 pin) |
EMERGENCY (EM SUFFIX)
| Replacement Battery Code | 01302 |
|---|---|
| Emergency Classification | C0:E12.5, C90:E6.3 |
| Emergency Control | DALI Monitored (DT1) |
| DALI Monitored ~ Supports Emergency test and monitoring over DALI (IEC62386) with full compliance to IEC62386-202. | |
| Decal Size | 300 x 150 mm |
| Emergency Duration | 90 mins |
| Emergency Mode | Maintained |
| Emergency Output Power | 750 mW |
| Viewing Distance | 24 m |
COMPLIANCE
| Product Design Life | 10 years |
|---|---|
| The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use. | |
| Standards |
|
WARRANTY
| Commercial Use Warranty | 5 RTB (Total 5 Years) |
|---|
Â
| MINIMUM CEILING DEPTH | 100 mm |
|---|---|
| CUTOUT | 305 x 65 mm |
| PRODUCT HEIGHT | 265 mm |
| PRODUCT LENGTH | 365 mm |
| PRODUCT WIDTH | 95 mm |
Additional information
| Title | Default Title |
|---|
Related products
-
- 70 % Off -
- 70 % Off -
- 70 % Off -
- 70 % Off
